HMC589ST89 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 4 GHz

v02.0907
Evaluation PCB
HMC589ST89 / 589ST89E
InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 4 GHz
8
List of Materials for Evaluation PCB 116405 ^[1]
Item
J1 - J2
J3 - J4
C1, C2
C3
C4
C5
R1
L1
U1
Description
PCB Mount SMA Connector
DC Pin
Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
2.2 μF Capacitor, Tantalum
Resistor, 1206 Pkg.
Inductor, 0603 Pkg.
HMC589ST89 / HMC589ST89E
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and package bottom should
be connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
PCB ^[2]
108370 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
[3] Evaluation board tuned for 1.9 GHz operation
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
8 - 159