HMC569LC5_10 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs MMIC I/Q DOWNCONVERTER 12 - 16 GHz

HMC569LC5
v06.1208
UED _{Evaluation PCB}
GaAs MMIC I/Q DOWNCONVERTER
12 - 16 GHz
DISCPORONTDIUNCT _{Not Recommended for New} ^Designs
10
List of Materials for Evaluation PCB 111227 ^[1]
Item
C1, C2, C3
C4, C5, C6
C7, C8,C9
J1, J2
J3, J4
J5, J6
J7
R1, R2
Description
Capacitor 0402, Pkg. 100pF
Capacitor 0402, Pkg. 1000pF
Capacitor, Case A, 2.2uF *(Polarity)
PCB Mount SMA RF Connector, SRI
PCB Mount SMA Connector, Johnson
DC Pin
DC Pin
Resistor, 0402 Pkg. 0 Ohm
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 Ohm impedance while the
package ground leads and exposed paddle should
be connected directly to the ground plane similar
to that shown. A sufficient number of via holes
should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request.
U1
HMC569LC5
VC1
N/C
PCB ^[2]
111225 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
10 - 6