HMC567LC5 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs MMIC I/Q DOWNCONVERTER 7 - 9 GHz

Evaluation PCB
v03.1208
HMC567LC5
GaAs MMIC I/Q DOWNCONVERTER
7 - 9 GHz
8
List of Materials for Evaluation PCB 111239 ^[1]
Item
C1, C2
C4, C5
C7, C8
J1, J2
J3, J4
J5
J6
VC1, VD1
Description
Capacitor 0402, Pkg. 100pF
Capacitor 0402, Pkg. 1000pF
Capacitor, Case A, 2.2uF *(Polarity)
PCB Mount SMA RF Connector, SRI
PCB Mount SMA Connector, Johnson
DC Pin, VD2 = VddRF
DC Pin, VD3 = VddLO
N/C
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
U1
HMC567LC5
PCB ^[2]
111225 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
8 - 153