HMC566LP4_09 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs pHEMT MMIC LOW NOISE AMPLIFIER, 28 - 36 GHz

v02.0609
Evaluation PCB
HMC566LP4E
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 28 - 36 GHz
8
List of Materials for Evaluation PCB 122782 ^[1]
Item
Description
J1 - J5
DC Pin
J6 - J7
PCB Mount K Connector
C1 - C4
100 pF Capacitor, 0402 Pkg.
C5 - C8
10 nF Capacitor, 0603 Pkg.
C9 - C12
4.7 μF Capacitor, Tantalum
U1
HMC566LP4E
PCB ^[2]
122780 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25 FR
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and package bottom should
be connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
8 - 195