HMC548LP3 Datasheet, PDF (6/10 Pages) Hittite Microwave Corporation – SiGe HBT MMIC LOW NOISE AMPLIFIER, 1.2 - 3.0 GHz

v00.0406
Absolute Maximum Ratings
Drain Bias Voltage (Vcc)
RF Input Power (RFin)(Vcc = +5.0 Vdc)
Junction Temperature
Continuous Pdiss (T = 85 °C)
(derate 14 mW/°C above 85 °C)
Thermal Resistance
(junction to ground paddle)
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
+7.0 Vdc
-5 dBm
150 °C
0.942 W
69 °C/W
-65 to +150 °C
-40 to +85 °C
Class 1A
Outline Drawing
HMC548LP3 / 548LP3E
SiGe HBT MMIC LOW NOISE
AMPLIFIER, 1.2 - 3.0 GHz
5
%,%#42/34!4)#3%.3)4)6%$%6)#%
/"3%26%(!.$,).'02%#!54)/.3
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
HMC548LP3
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC548LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
548
XXXX
548
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
5 - 541