HMC546LP2_10 Datasheet, PDF (6/8 Pages) Hittite Microwave Corporation – GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz

v03.0809
HMC546LP2 / 546LP2E
GaAs MMIC 10W FAILSAFE SWITCH
0.2 - 2.7 GHz
Absolute Maximum Ratings
Vdd = 3V Vdd = 5V
Max. CW Input Power ^[1][2]
Tx Port 40 dBm
Rx Port 24 dBm
40 dBm
29 dBm
Max Channel Temp.
150 °C
150 °C
Thermal Resistance
Tx Port 54 °C/W
Rx Port 68 °C/W
54 °C/W
86 °C/W
Continuous Dissipated
Power
Tx Port
Rx Port
1.12 W
73 mW
1.12 W
232 mW
Supply Voltage (Vdd)
+10V
Control Voltage Range (Vctl)
-0.2 to Vdd + 1V
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
[1] Do not “hot switch” power levels greater than +24 dBm.
[2] Max input power can be higher for duty cycle <100%
Outline Drawing
Truth Table
Control Input
Signal Path State
Vctl
Vdd
RFC To Tx
RFC to Rx
0.0
Vdd
OFF
ON
Vdd
Vdd
ON
OFF
0
0
ON
OFF
High Z
High Z
ON
OFF
Vdd = +3V to +8V
Control Input Voltage Tolerances are ± 0.2 Vdc.
DC blocking capacitors are required at ports RFC, Tx and Rx.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
11
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
HMC546LP2
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC546LP2E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
546
XXX
546
XXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
11 - 165