HMC538LP4_09 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – 600° ANALOG PHASE SHIFTER, 6 - 15 GHz

v02.0209
Evaluation PCB
HMC538LP4 / 538LP4E
600° ANALOG PHASE SHIFTER,
6 - 15 GHz
10
List of Materials for Evaluation PCB 108812 ^[1]
Item
Description
J1 - J3
PCB Mount SMA RF Connector
U1
PCB ^[2]
HMC538LP4 / HMC538LP4E
Analog Phase Shifter
111296 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
10 - 7