HMC527LC4_09 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs MMIC I/Q MIXER 8.5 - 13.5 GHz

v02.1208
Evaluation PCB
HMC527LC4
GaAs MMIC I/Q MIXER
8.5 - 13.5 GHz
8
List of Materials for Evaluation PCB 109998 ^[1]
Item
Description
J1 - J2
PCB Mount K RF Connector, SRI
J3 - J4
PCB Mount SMA Connector, Johnson
U1
HMC527LC4
PCB ^[2]
109996 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
8 - 141