HMC509LP5 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – MMIC VCO w/ HALF FREQUENCY OUTPUT 7.8 - 8.8 GHz

v00.0406
Evaluation PCB
HMC509LP5 / 509LP5E
MMIC VCO w/ HALF FREQUENCY
OUTPUT 7.8 - 8.8 GHz
11
List of Materials for Evaluation PCB 110227 ^[1]
Item
Description
J1 - J3
PCB Mount SMA RF Connector
J4, J5
2 mm DC Header
C1 - C2
100 pF Capacitor, 0402 Pkg.
C4 - C5
2.2 μF Tantalum Capacitor
U1
PCB ^[2]
HMC509LP5 / HMC509LP5E VCO
110225 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and backside ground paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
11 - 125