HMC483MS8G Datasheet, PDF (6/8 Pages) Hittite Microwave Corporation – HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 0.7 - 1.4 GHz

HMC483MS8G / 483MS8GE
v00.0805
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.4 GHz
Pin Descriptions
Pin Number
Function
1
LO
2
3, 6, 7
N/C
GND
Description
This pin is AC coupled & matched to 50 Ohms
from 0.7 to 1.4 GHz.
Not connected. This pin may be connected to RF/DC
ground without affecting performance.
This pin and the ground paddle must be
connected to RF ground.
Interface Schematic
7
4
Vdd
Power supply for LO amplifier.
An external RF bypass capacitor is required.
This pin is DC coupled. For applications not requiring
operation to DC this port should be DC blocked externally
5
IF
using a series capacitor. Choose value of capacitor to pass
IF frequency desired. For operation to DC, this pin must
not sink/source more than 40 mA of current or failure may
result.
8
RF
This pin is DC coupled & matched to 50 Ohms
from 0.7 to 1.4 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
7 - 339