HMC481MP86_10 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz

Evaluation PCB
v03.0810
HMC481MP86 / 481MP86E
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
8
List of Materials for Evaluation PCB 107490 ^[1]
Item
Description
The circuit board used in the application should
J1 - J2
PCB Mount SMA Connector
use RF circuit design techniques. Signal lines
J3 - J4
DC Pin
should have 50 Ohm impedance while the package
C1, C2
Capacitor, 0402 Pkg.
ground leads should be connected directly to the
C3
100 pF Capacitor, 0402 Pkg.
ground plane similar to that shown. A sufficient
C4
1000 pF Capacitor, 0603 Pkg.
number of via holes should be used to connect
C5
2.2 μF Capacitor, Tantalum
the top and bottom ground planes. The evaluation
R1
Resistor, 1210 Pkg.
board should be mounted to an appropriate heat
L1
Inductor, 0603 Pkg.
sink. The evaluation circuit board shown is available
U1
HMC481MP86 / HMC481MP86E
from Hittite upon request.
PCB ^[2]
107087 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
8-6