HMC476SC70_10 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6 GHz

v01.0110
Evaluation PCB
HMC476SC70 / 476SC70E
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 6 GHz
9
List of Materials for Evaluation PCB 118038 ^[1]
Item
J1 - J2
J3 - J4
C1 - C3
C4
C5
R1
L1
U1
PCB ^[2]
Description
PCB Mount SMA Connector
DC Pin
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
2.2 μF Capacitor, Tantalum
50 Ohm Resistor, 1210 Pkg.
18 nH Inductor, 0603 Pkg.
HMC476SC70(E)
117360 Evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads should be connected directly to the ground
plane similar to that shown. A sufficient number
of via holes should be used to connect the top
and bottom ground planes. The evaluation board
should be mounted to an appropriate heat sink. The
evaluation circuit board shown is available from
Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
9 - 91