HMC476MP86 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 6.0 GHz

v00.0603
MICROWAVE CORPORATION
Evaluation PCB
HMC476MP86
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 6.0 GHz
8
List of Materials
Item
Description
J1 - J2
PC Mount SMA Connector
J3 - J4
DC Pin
C1, C2
Capacitor, 0402 Pkg.
C3
100 pF Capacitor, 0402 Pkg.
C4
1000 pF Capacitor, 0603 Pkg.
C5
2.2 µF Capacitor, Tantalum
R1
Resistor, 1210 Pkg.
L1
Inductor, 0603 Pkg.
U1
HMC476MP86
PCB*
107087 Evaluation PCB
* Circuit Board Material: Rogers 4350
The circuit board used in the final application should use
RF circuit design techniques. Signal lines should have
50 ohm impedance while the package ground leads
should be connected directly to the ground plane similar
to that shown. A sufficient number of VIA holes should be
used to connect the top and bottom ground planes. The
evaluation board should be mounted to an appropriate
heat sink. The evaluation circuit board shown is available
from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com
8 - 247