HMC446 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs MMIC 10W T/R SWITCH, 824 - 894 MHz

v02.0304
MICROWAVE CORPORATION
Evaluation PCB
HMC446
GaAs MMIC 10W T/R
SWITCH, 824 - 894 MHz*
List of Material
Item
Description
J1 - J3
PC Mount SMA RF Connector
J4 - J6
DC Pin
C1 - C3
330 pF Capacitor, 0603 Pkg.
LTx
22 nH Inductor, 0603 Pkg.
LRx
8.2 nH Inductor, 0402 Pkg.
U1
HMC446 T/R Switch
PCB*
103835 Evaluation PCB
* Circuit Board Material: Rogers 4350
14
The circuit board used in the final application should use
RF circuit design techniques. Signal lines should have
50 ohm impedance while the package ground leads
should be connected directly to the ground plane similar
to that shown above. A sufficient number of VIA holes
should be used to connect the top and bottom ground
planes. The evaluation circuit board as shown is avail-
able from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com
14 - 259