HMC437MS8G_10 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – SMT GaAs HBT MMIC DIVIDE-BY-3, DC - 7 GHz

Evaluation PCB
v04.0410
HMC437MS8G / 437MS8GE
SMT GaAs HBT MMIC
DIVIDE-BY-3, DC - 7 GHz
4
List of Materials for Evaluation PCB 105786 ^[1]
Item
J1 - J3
J4, J5
C1 - C4
C5
C6
U1
Description
PCB Mount SMA RF Connector
DC Pin
100 pF Capacitor, 0402 Pkg.
10,000 pF Capacitor, 0603 Pkg.
4.7 μF Tantalum Capacitor
HMC437MS8G / HMC437MS8GE
Divide-by-3
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and backside ground slug should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available
PCB ^[2]
105697 Eval Board
from Hittite upon request. This evaluation board is
[1] Reference this number when ordering complete evaluation PCB
designed for single ended input testing. J2 and J3
[2] Circuit Board Material: Rogers 4350
provide differential output signals.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
4 - 89