HMC436MS8G_10 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs MMIC DPDT DIVERSITY OR SP3T SWITCH, 4.9 - 5.9 GHz

HMC436MS8G / 436MS8GE
v04.0607
UED _{Evaluation PCB}
GaAs MMIC DPDT DIVERSITY OR
SP3T SWITCH, 4.9 - 5.9 GHz
DISCPORONTDIUNCT _{Not Recommended for New} ^Designs
15
List of Materials for Evaluation PCB 103132 ^[1]
Item
J1 - J4
J5 - J8
Description
PCB Mount SMA Connector
DC Pin
C1 - C4
100 pF Capacitor, 0402 Pkg.
R1 - R4 ^[3] 100 Ohm Resistor, 0402 Pkg.
U1
PCB ^[2]
HMC436MS8G / HMC436MS8GE
DPDT Diversity or SP3T Switch
103037 Evaluation PCB 1.5” x 1.5”
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and exposed paddle should
be connected directly to the ground plane similar
to that shown above. A sufficient number of via-
holes should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
above is available from Hittite upon request.
[2] Circuit Board Material: Rogers 4350
[3] These optional resistors will provide isolation between the DC
and RF circuitry.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
15 - 6