HMC436MS8G Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs MMIC DPDT DIVERSITY SWITCH, 4.9 - 5.9 GHz

v01.0702
MICROWAVE CORPORATION
Evaluation PCB
HMC436MS8G
GaAs MMIC DPDT DIVERSITY
SWITCH, 4.9 - 5.9 GHz
*R1 & R2 = 100 Ohm.
These optional resistors will
provide more RF path to control
circuit isolation.
14
List of Material
Item
Description
J1 - J4
PC Mount SMA Connector
J5 - J8
DC Pin
C1 - C4
100 pF Capacitor, 0402 Pkg.
R1 - R2
100 Ohm Resistor, 0402 Pkg.
U1
HMC436MS8G DPDT Diversity Switch
PCB*
103037 Evaluation PCB 1.5” x 1.5”
* Circuit Board Material: Rogers 4350
The circuit board used in the final application should use RF
circuit design techniques. Signal lines should have 50 ohm
impedance while the package ground leads and exposed
paddle should be connected directly to the ground plane
similar to that shown above. A sufficient number of VIA
holes should be used to connect the top and bottom ground
planes. The evaluation circuit board shown above is avail-
able from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com
14 - 241