HMC406MS8G_10 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs InGaP HBT MMIC POWER AMPLIFIER, 5 - 6 GHz

Evaluation PCB
v05.1209
HMC406MS8G / 406MS8GE
GaAs InGaP HBT MMIC
POWER AMPLIFIER, 5 - 6 GHz
11
List of Materials for Evaluation PCB 104989 ^[1]
Item
J1 - J2
J3
C1 - C3
C4
C5
C6
C7
L1
U1
Description
PCB Mount SMA RF Connector
2mm DC Header
330 pF Capacitor, 0603 Pkg.
2.2 μF Capacitor, Tantalum
0.6 pF Capacitor, 0603 Pkg.
1.6 pF Capacitor, 0603 Pkg.
100 pF Capacitor, 0603 Pkg.
3.9 nH Inductor, 0603 Pkg.
HMC406MS8G(E) Amplifier
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
PCB ^[2]
105021 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Roger 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
11 - 19