HMC392LH5 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs MMIC LOW NOISE AMPLIFIER, 3.5 - 7.0 GHz

v00.0707
Evaluation PCB
HMC392LH5
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
7
List of Materials for Evaluation PCB 117431 ^[1]
Item
Description
J1, J2
SMA
J3 - J4
DC Pin
C1
100 pF capacitor, 0402 pkg.
C2
1,000 pF Capacitor, 0603 pkg.
C3
4.7 μF Capacitor, Tantalum
U1
HMC392LH5 Amplifier
PCB ^[2]
117429 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350.
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
7 - 101