HMC347LP3_08 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 14 GHz

Evaluation PCB
v06.0805
HMC347LP3 / 347LP3E
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 14 GHz
10
List of Materials for Evaluation PCB 105711 ^[1]
Item
Description
J1 - J3
PCB Mount SRI SMA Connector
J4 - J6
DC Pin
R1 - R2
100 Ohm Resistor, 0603 Pkg.
U1
PCB ^[2]
HMC347LP3 / HMC347LP3E
SPDT Switch
107521 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should have
50 ohm impedance and the package ground leads
and package bottom should be connected directly
to the ground plane similar to that shown above. The
evaluation circuit board shown above is available
from Hittite Microwave Corporation upon request.
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
10 - 231