HMC344LC3 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 8.0 GHz

Evaluation PCB
v00.1206
HMC344LC3
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 8.0 GHz
9
List of Materials for Evaluation PCB 105311 ^[1]
Item
Description
J1 - J7
PCB Mount SMA RF Connector
J8 - J11
DC Pin
C1 - C5
0Ω Resistor, 0402 Pkg.
C6
1000 pF Capacitor, 0402 Pkg.
U1
PCB ^[2]
HMC344LC3
104708 Evaluation PCB 1.29”x1.55”
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should have
50 ohm impedance and the package ground leads
and backside ground slug should be connected
directly to the ground plane similar to that shown
above. The evaluation circuit board shown above is
available from Hittite Microwave Corporation upon
request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
9 - 183