HMC773LC3B Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – GaAs MMIC FUNDAMENTAL MIXER, 6 - 26 GHz

v03.0809
HMC773LC3B
GaAs MMIC FUNDAMENTAL
MIXER, 6 - 26 GHz
9
Pin Descriptions
Pin Number
Function
1, 3, 7, 9, 10, 12
GND
Description
These pins and package bottom must also be
connected to RF/DC ground.
2
5
8
4, 6, 11
LO
This pin is AC coupled and matched to 50 Ohms.
This pin is DC coupled. For applications not requiring operation
to DC, this port should be DC blocked externally using a series
IF
capacitor whose value has been chosen to pass the neces-
sary IF frequency range. For operation to DC, this pin must not
source or sink more than 2 mA of current or part non-function
and possible part failure will result.
RF
This pin is AC coupled and matched to 50 Ohms.
These pins are not connected internally; however, all data
N/C
shown herein was measured with these pins connected to
RF/DC ground externally.
Interface Schematic
9 - 390
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com