HMC759LP3E_10 Datasheet, PDF (5/8 Pages) Hittite Microwave Corporation – 0.25 dB LSB BiCMOS MMIC 7-BIT DIGITAL ATTENUATOR, 10 - 300 MHz

v00.0909
8
Absolute Maximum Ratings
RF Input Power (RF1, RF2)
Digital Inputs
(SERIN LE, CLK, PUP1, PUP2)
Bias Voltage (Vdd)
Channel Temperature
Continuous Pdiss (T = 85 °C)
(derate 9.8 mW/°C above 85 °C)
Thermal Resistance
(channel to ground paddle)
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
20 dBm (T = +85 °C)
-0.5 to Vdd +0.5V
5.6V
125 °C
0.29 W
138 °C/W
-65 to +150 °C
-40 to +85 °C
Class 1A
HMC759LP3E
0.25 dB LSB BiCMOS MMIC 7-BIT
DIGITAL ATTENUATOR, 10 - 300 MHz
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
8-5
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
HMC759LP3E RoHS-compliant Low Stress Injection Molded Plastic
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
Lead Finish
100% matte Sn
MSL Rating
MSL1 ^[2]
Package Marking ^[1]
759
XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]