HMC694LP4 Datasheet, PDF (5/8 Pages) Hittite Microwave Corporation – GaAs MMIC ANALOG VARIABLE GAIN AMPLIFIER, 6 - 17 GHz

v02.1108
12
Absolute Maximum Ratings
Drain Bias Voltage (Vdd1, 2, 3)
Gate Bias Voltage (Vgg1, 2)
Gain Control Voltage (Vctrl)
RF Power Input
Channel Temperature
Continuous Pdiss (T = 85 °C)
(derate 10.2 mW/°C above 85 °C) ^[1]
Thermal Resistance
(Channel to ground paddle)
Storage Temperature
Operating Temperature
+5.5V
-3 to 0V
-3 to 0V
+5 dBm
175 °C
0.92 W
97.6 °C/W
-65 to +150 °C
-40 to +85 °C
Outline Drawing
HMC694LP4 / 694LP4E
GaAs MMIC ANALOG VARIABLE
GAIN AMPLIFIER, 6 - 17 GHz
Bias Voltage
Vdd1,2,3 (V)
+5.0
Vgg1,2 (V)
0V to -2V
Idd Total (mA)
170
Igg Total (mA)
<3 µA
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
12 - 5
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Part Number
HMC694LP4
Package Body Material
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC694LP4E RoHS-compliant Low Stress Injection Molded Plastic
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
100% matte Sn
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H694
XXXX
H694
XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]