HMC676LP3E Datasheet, PDF (5/8 Pages) Hittite Microwave Corporation – 10 GHz LATCHED COMPARATOR WITH RSECL OUTPUT STAGE

v00.1110
HMC676LP3E
10 GHz LATCHED COMPARATOR
WITH RSECL OUTPUT STAGE
1
Absolute Maximum Ratings
Input Supply Voltage (Vcci to GND)
-0.5V to +4V
Output Supply Voltage (Vcco to GND)
-0.5V to +4V
Positive Supply Differential (Vcci - Vcco)
-0.5V to +3V
Input Voltage
-2V to +2V
Differential Input Voltage
-2V to +2V
Input Voltage, Latch Enable
-0.5V to Vcci +0.5V
Applied Voltage (HYS)
Vee to GND
Maximum Input Current
±1 mA
Output Current
40 mA
Storage Temperature
-65°C to +150°C
Junction Temperature
125°C
Continuous Pdiss (T = 85°C)
(Derate 43.5 mW/°C above 85°C)
1.74 W
Thermal Resistance (Rth) (Junction to Lead) 23 °C/W
Operating Temperature
-40°C to +85°C
ESD Sensitivity (HBM)
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
1-5
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Part Number
Package Body Material
HMC676LP3E RoHS-compliant Low Stress Injection Molded Plastic
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
Lead Finish
100% matte Sn
MSL Rating
MSL1 ^[1]
Package Marking ^[2]
H676
XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]