HMC520 Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – GaAs MMIC I/Q MIXER 6 - 10 GHz

v00.1004
HMC520
GaAs MMIC I/Q MIXER
6 - 10 GHz
3
Pad Descriptions
Pad Number
Function
1
RF
4
LO
2 (5)
IF2
3 (6)
IF1
GND
Description
This pad is AC coupled and matched to
50 Ohms from 6 to 10 GHz.
This pad is AC coupled and matched to
50 Ohms from 6 to 10 GHz.
This pad is DC coupled. For applications not requiring
operation to DC, this port should be DC blocked externally
using a series capacitor whose value has been chosen to
pass the necessary IF frequency range. For operation to
DC, this pad must not source/sink more than 3mA of current
or die non-function and possible die failure will result. Pads
5 and 6 are alternate IF ports.
The backside of the die must be
connected to RF/DC ground.
Interface Schematic
Assembly Diagrams
3 - 124
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com