HMC506LP4 Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – MMIC VCO w/ BUFFER AMPLIFIER, 7.8 - 8.7 GHz

v00.0804
Evaluation PCB
HMC506LP4
MMIC VCO w/ BUFFER
AMPLIFIER, 7.8 - 8.7 GHz
15
List of Materials for Evaluation PCB 105706*
Item
J1 - J2
J3 - J4
C1
Description
PC Mount SMA RF Connector
DC Pin
4.7 µF Tantalum Capacitor
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown. A
C2
10,000 pF Capacitor, 0603 Pkg.
U1
HMC506LP4 VCO
PCB**
105667 Eval Board
** Circuit Board Material: Rogers 4350
sufficient number of via holes should be used to con-
nect the top and bottom ground planes. The evalua-
tion circuit board shown is available from Hittite upon
request.
* Reference this number when ordering complete evaluation PCB.
15 - 106
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com