HMC505LP4_08 Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – MMIC VCO w/ BUFFER AMPLIFIER, 6.8 - 7.4 GHz

v02.0508
Evaluation PCB
HMC505LP4 / 505LP4E
MMIC VCO w/ BUFFER
AMPLIFIER, 6.8 - 7.4 GHz
11
List of Materials for Evaluation PCB 105706 ^[1]
Item
Description
J1 - J2
PCB Mount SMA RF Connector
J3 - J4
DC Pin
C1
4.7 μF Tantalum Capacitor
C2
10,000 pF Capacitor, 0603 Pkg.
U1
PCB ^[2]
HMC505LP4 / HMC505LP4E VCO
105667 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
11 - 100
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com