HMC488MS8G Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – GaAs MMIC MIXER W/ INTEGRATED LO AMPLIFIER, 4.0 - 7.0 GHz

MICROWAVE CORPORATION
v00.0503
HMC488MS8G
GaAs MMIC MIXER W/ INTEGRATED
LO AMPLIFIER, 4.0 - 7.0 GHz
Outline Drawing
12
Pin Descriptions
Pin Number
Function
1
LO
2, 6, 7
GND
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD MATERIAL: COPPER ALLOY
3 LEAD PLATING: Sn/Pb SOLDER
4. DIMENSIONS ARE IN INCHES [MILLIMETERS]
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO THE PCB RF GROUND
Description
This pin is AC coupled & matched to 50 Ohm
from 4.0 to 7.0 GHz.
This pin must be connected to RF ground.
Interface Schematic
3, 4
Vdd
These pins are power supply for LO amp.
An external RF bypass capacitor (10,000 pF) is required.
12 - 282
This pin is DC coupled. For applications not requiring
operation to DC this port should be DC blocked externally
5
IF Port
using a series capacitor. Choose value of capacitor to pass
IF frequency desired. For operation to DC, this pin must not
sink/source more than 40 mA of current or failure may result.
8
RF Port
This pin is DC coupled & matched to 50 Ohm
from 4.0 to 7.0 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com