HMC483MS8G_10 Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz

HMC483MS8G / 483MS8GE
v01.0710
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.5 GHz
10
Package Information
Part Number
Package Body Material
HMC483MS8G
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC483MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H483
XXXX
H483
XXXX
Pin Descriptions
Pin Number
Function
1
LO
2
3, 6, 7
N/C
GND
Description
This pin is AC coupled
and matched to 50 Ohms.
Not connected. This pin may be connected to RF/DC
ground without affecting performance.
This pin and the ground paddle must be
connected to RF ground.
Interface Schematic
4
Vdd
Power supply for LO amplifier.
An external RF bypass capacitor is required.
This pin is DC coupled. For applications not requiring
operation to DC this port should be DC blocked externally
using a series capacitor. Choose value of capacitor to pass
5
IF
IF frequency desired. For operation to DC, this pin must
not sink/source more than 40 mA of current or failure may
result.
8
RF
This pin is DC coupled
and matched to 50 Ohms.
10 - 234
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]