HMC424LP3_09 Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – 0.5dB LSB GaAs MMIC 6-BIT DIGITAL ATTENUATOR, DC - 13 GHz

v08.0809
HMC424LP3E
0.5dB LSB GaAs MMIC 6-BIT DIGITAL
ATTENUATOR, DC - 13 GHz
5
Pin Description
Pad Number
Function
Description
Interface Schematic
1, 3, 10, 12
GND
Package bottom has an exposed metal paddle that
must also be connected to RF ground
2, 11
RFIN, RFOUT
This pin is DC coupled and matched to 50 Ohm. Blocking capaci-
tors are required if RF line potential is not equal to 0V.
4, 5, 6, 7, 8, 9
V6 - V1
See truth table and control voltage table.
13, 14, 16
15
N/C
VEE
This pin should be connected to PCB RF ground to maximize
performance
Supply Voltage -5V ± 10%
Suggested Driver Circuit (One Circuit Required Per Bit Control Input)
5 - 114
Simple driver using inexpensive standard logic ICs provides fast
switching using minimum DC current.
* Recommended value to suppress unwanted RF signals at V1
- V6 control lines.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com