HMC362S8G_06 Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – SMT GaAs HBT MMIC DIVIDE-BY-4, DC - 12.0 GHz

5
Evaluation PCB
v03.0505
HMC362S8G / 362S8GE
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 12.0 GHz
List of Materials for Evaluation PCB 104631 ^[1]
Item
Description
J1 - J3
PCB Mount SMA RF Connector
C1 - C4
100 pF Capacitor, 0402 Pkg.
C5
1000 pF Capacitor, 0603 Pkg.
C6
10 μF Tantalum Capacitor
U1
PCB ^[2]
HMC362S8G / HMC362S8GE Divide-by-4
104627 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and backside ground slug
should be connected directly to the ground plane
similar to that shown. A sufficient number of via
holes should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request. This evalua-
tion board is designed for single ended input test-
ing. J2 and J3 provide differential output signals.
5 - 12
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com