HMC358MS8G_07 Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – MMIC VCO w/ BUFFER AMPLIFIER, 5.8 - 6.8 GHz

Evaluation PCB
v04.0607
HMC358MS8G / 358MS8GE
MMIC VCO w/ BUFFER
AMPLIFIER, 5.8 - 6.8 GHz
10
List of Materials for Evaluation PCB 104713 ^[1]
Item
Description
J1 - J3
PCB Mount SMA RF Connector
C1
10 μF Tantalum Capacitor
U1
PCB ^[2]
HMC358MS8G / HMC358MS8GE VCO
104368 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and backside ground slug should be
connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
10 - 6
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com