HMC349LP4C Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – HIGH ISOLATION SPDT NON-REFLECTIVE SWITCH, DC - 4.0 GHz

MICROWAVE CORPORATION
v00.0304
HMC349LP4C
HIGH ISOLATION SPDT
NON-REFLECTIVE SWITCH, DC - 4.0 GHz
Evaluation PCB
14
List of Material for Evaluation PCB 106975*
Item
J1 - J3
Description
PC Mount SMA RF Connector
The circuit board used in the final application should
be generated with proper RF circuit design techniques.
Signal lines at the RF port should have 50 ohm imped-
J4 - J8
C1 - C3
DC Pin
100 pF Capacitor, 0402 Pkg.
ance and the package ground leads and backside
ground slug should be connected directly to the ground
plane similar to that shown above. The evaluation circuit
U1
HMC349LP4C SPDT Switch
board shown above is available from Hittite Microwave
PCB**
106965 Evaluation PCB
Corporation upon request.
** Circuit Board Material: Rogers 4350
* Reference this number when ordering complete evaluation PCB.
14 - 228
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com