HMC310MS8G Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – BLUETOOTH & 2.4 GHz WLAN GaAs MMIC TRANSCEIVER

v01.0401
MICROWAVE CORPORATION
8
Evaluation PCB
HMC310MS8G
BLUETOOTH & 2.4 GHz WLAN
GaAs MMIC TRANSCEIVER
Note:
DC blocking capacitors on the Tx and ANT
ports are required to evaluate this part.
These capacitors may not be required in
the final circuit design if interfacing com-
ponents are DC blocked.
List of Material
Item
Description
J1, J2, J3
PC Mount SMA Connector
J4, J5
DC Pins
C1
.01 µF Capacitor, 0603 Pkg.
C2, C3
100 pF Capaciotor, 0603 Pkg.
U1
HMC310MS8G Transceiver
PCB*
Evaluation Board 1.5” x 1.55”
*Circuit Board Material: Roger 4350
The circuit board used in the final application should use RF
circuit design techniques. Signal lines should have 50 ohm
impedance while the package ground leads and backside
ground slug should be connected directly to the ground
plane similar to that shown. A sufficient number of via holes
should be used to connect the top and bottom ground
planes. The evaluation circuit board shown is available from
Hittite upon request.
8 - 60
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com