HMC214MS8_09 Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – HIGH IP3 GaAs MMIC MIXER, 2.4 - 4.0 GHz

HMC214MS8 / 214MS8E
v01.1109
HIGH IP3 GaAs MMIC
MIXER, 2.4 - 4.0 GHz
9
Pin Descriptions
Pin Number
Function
1
LO
Description
This pin is DC coupled & matched to 50 Ohms. Blocking
capacitors are required if line potential is not equal to 0V.
2, 4
3, 6, 7
5
N/C
GND
IF
The pins are not connected internally; however, all data shown
herein was measured with these pins connected to RF/DC
ground externally.
This pin must be connected to RF ground.
This pin is DC coupled. For applications not requiring operation
to DC this port should be DC blocked externally using a series
capacitor. Choose value of capacitor to pass IF frequency
desired. For operation to DC, this pin must not sink/source
more than 40 mA of current or failure may result.
8
RF
This pin is DC coupled
and matched to 50 Ohms.
Interface Schematic
9 - 82
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com