English
Language : 

HMC1060LP3E Datasheet, PDF (5/16 Pages) Hittite Microwave Corporation – QUAD LOW NOISE HIGH PSRR
v00.1211
Absolute Maximum Ratings
VDD to GND Voltage (max / min) +6.5 V / -0.3 V [1]
EN to GND Voltage (max / min)
VDD + 0.5 V / -0.3 V
RDx / HVx to GND Voltage (max
/ min)
VDD + 0.5 V / -0.3 V
Thermal Resistance
(Junction to ground paddle)
Maximum Junction Temperature
25 °C/W
+150 °C [2]
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 3A
[1] Including short transient events
[2] Operation above +125 °C may shorten the lifetime of the device.
Operation above +150 °C risks immediate damage to the device.
Outline Drawing
HMC1060LP3E
QUAD LOW NOISE HIGH PSRR
LINEAR VOLTAGE REGULATOR
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to
absolute maximum rating conditions for extended periods
may affect device reliability. The absolute maximum ratings
apply individually only and not in combination.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB GROUND.
6. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1.
Package Information
Part Number
Package Body Material
Lead Finish
HMC1060LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
MSL Rating
MSL1 [2]
Package Marking [1]
1060
XXX
X
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
5
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com