HMC656LP2E_11 Datasheet, PDF (4/4 Pages) Hittite Microwave Corporation – WIDEBAND FIXED ATTENUATOR FAMILY, DC - 25 GHz

Evaluation PCB
HMC656LP2E to HMC658LP2E
v01.0308
WIDEBAND FIXED ATTENUATOR FAMILY, DC - 25 GHz
HMC656LP2E / HMC657LP2E / HMC658LP2E
12
List of Materials for Evaluation PCB 119197 ^[1]
Item
J1 - J2
U1
PCB ^[2]
Description
PCB Mount SMA Connector
HMC656LP2E through HMC658LP2E
Passive Attenuator
119194 Evaluation PCB
The circuit board used in the final application should
be generated with proper RF circuit design tech-
niques. Signal lines at the RF port should have 50
ohm impedance and the package ground leads and
exposed paddle should be connected directly to the
[1] Reference this number when ordering complete evaluation PCB
ground plane similar to that shown above. The eval-
[2] Circuit Board Material: Rogers 4350
uation circuit board shown above is available from
Hittite Microwave Corporation upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
12 - 4