HMC615LP4_11 Datasheet, PDF (4/6 Pages) Hittite Microwave Corporation – GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 2.3 - 4.0 GHz

v02.1210
HMC615LP4 / 615LP4E
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 2.3 - 4.0 GHz
Absolute Maximum Ratings
RF / IF Input (Vcc= +5V)
LO Drive (Vcc= +5V)
BIAS
Junction Temperature
Continuous Pdiss (T = 85°C)
(derate 5.21 mW/°C above 85°C)
Thermal Resistance
(junction to ground paddle)
Storage Temperature
Operating Temperature
+27 dBm
+10 dBm
+7 Vdc
150°C
0.339 W
192 °C/W
-65 to +150°C
-40 to +85°C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
Harmonics of LO
nLO Spur @ RF Port
LO Freq. (GHz)
1
2
3
4
1
8
13
29
31
1.8
5
23
18
34
2.6
11
12
27
30
3.4
15
16
48
27
4.2
7
18
27
27
5
16
27
38
43
LO = 0 dBm
All values in dBc below input LO level measured at RF port.
Typical Supply Current
Vcc
+5.0
Icc (mA)
65 mA
10
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Part Number
HMC615LP4
Package Body Material
Low Stress Injection Molded Plastic^[4]
Lead Finish
Sn/Pb Solder
MSL Rating
MSL1 ^[1]
HMC615LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
MSL1 ^[2]
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
[4] For availability of Non-RoHS HMC615LP4 products please contact Hittite Microwave sales directly.
Package Marking ^[3]
H615
XXXX
H615
XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
10 - 4