HMC443LP4_10 Datasheet, PDF (4/6 Pages) Hittite Microwave Corporation – SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER, 9.8 - 11.2 GHz OUTPUT

HMC443LP4 / 443LP4E
v04.0210
SMT GaAs HBT MMIC x4 ACTIVE
FREQUENCY MULTIPLIER, 9.8 - 11.2 GHz OUTPUT
Absolute Maximum Ratings
RF Input (Vcc = +5V)
Vcc
Channel Temperature
Continuous Pdiss (T=85 °C)
(derate 7.6 mW/°C above 85 °C)
Thermal Resistance (R )
th
(junction to ground paddle)
Storage Temperature
Operating Temperature
+20 dBm
+5.5V
135 °C
500 mW
130.8 °C/W
-65 to +150 °C
-40 to +85 °C
Outline Drawing
Typical Supply Current vs. Vcc
Vcc (V)
4.5
5.0
5.5
Icc (mA)
51
52
54
Note: Multiplier will operate over full voltage range shown
above.
5
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Part Number
HMC443LP4
Package Body Material
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC443LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H443
XXXX
H443
XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
5 - 45