HMC364_07 Datasheet, PDF (4/6 Pages) Hittite Microwave Corporation – GaAs HBT MMIC DIVIDE-BY-2, DC - 13 GHz

Pad Description
Pad Number
Function
1
IN
v03.1007
HMC364
GaAs HBT MMIC
DIVIDE-BY-2, DC - 13 GHz
1
Description
Interface Schematic
RF Input 180° out of phase with pad 3 for differential operation.
AC ground for single ended operation.
2
IN
3, 4, 5
Vcc
RF Input must be DC blocked.
Supply Voltage 5V ±0.25V can be applied to pad 3, 4, or 5.
6
OUT
Divided Output
7
OUT
Divided output 180° out of phase with OUT.
In the low power mode, the power select pin is left floating.
8
PWR SEL
By grounding this pin, the output power is increased by
approximately 10 dB.
9
PWR DWN
The power down pin is grounded for normal operation.
Applying 5 volts to this pin will power down this device.
10
DISABLE
The disable pin is grounded for normal operation.
Applying 5 volts to this pin will disable the input buffer amplifier.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
1 - 23