HMC345LP3 Datasheet, PDF (4/6 Pages) Hittite Microwave Corporation – GaAs MMIC SP4T NON-REFLECTIVE POSITIVE CONTROL SWITCH, DC - 8.0 GHz

v03.0604
HMC345LP3
MICROWAVE CORPORATION
GaAs MMIC SP4T NON-REFLECTIVE
POSITIVE CONTROL SWITCH, DC - 8.0 GHz
Absolute Maximum Ratings
Bias Voltage Range (Vdd)
Control Voltage Range
(A & B)
Channel Temperature
+7.0 Vdc
-0.5V to Vdd +1.0 Vdc
150 °C
Thermal Resistance
(Insertion Loss Path)
Thermal Resistance
(Terminated Path)
Storage Temperature
Operating Temperature
Maximum Input Power
143 °C/W
1030 °C/W
-65 to +150 °C
-40 to +85 °C
+24 dBm
Note: DC blocking capacitors are required at ports
RFC and RF1, 2, 3, & 4. Their value will determine the
lowest transmission frequency.
Outline Drawing
14
NOTES:
1. MATERIAL PACKAGE BODY: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY
3. LEAD AND GROUND PADDLE PLATING: Sn/Pb SOLDER
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
6. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
7. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB
LAND PATTERN.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com
14 - 197