HMC239S8_10 Datasheet, PDF (4/4 Pages) Hittite Microwave Corporation – GaAs MMIC SPDT SWITCH DC - 2.5 GHz

HMC239S8 / 239S8E
v02.0805
UED _{Typical Application Circuit}
GaAs MMIC SPDT SWITCH
DC - 2.5 GHz
DISCPORONTDIUNCT _{Not Recommended for New} ^Designs _{Simple driver using inexpensive standard logic ICs provides fast switching using minimum DC current.}
Evaluation Circuit Board
14
List of Materials for Evaluation PCB 101782 ^[1]
Item
Description
J1 - J3
PCB Mount SMA RF Connector
J4 - J6
DC Pin
C1 - C3
330 pF capacitor, 0402 Pkg.
U1
PCB ^[2]
HMC239S8 / HMC239S8E SPDT Switch
101780 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the application should be
generated with proper RF circuit design techniques.
Signal lines at the RF port should have 50 Ohm
impedance and the package ground leads and
package bottom should be connected directly to the
ground plane similar to that shown above. The eval-
uation circuit board shown above is available from
Hittite Microwave Corporation upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
14 - 4