HMC733LC4B_11 Datasheet, PDF (3/4 Pages) Hittite Microwave Corporation – WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 10 - 20 GHz

v03.0411
HMC733LC4B
WIDEBAND MMIC VCO w/ BUFFER
AMPLIFIER, 10 - 20 GHz
Supply Current vs. Vcc, T = +25 °C
80
75
70
Absolute Maximum Ratings
Vcc
Vtune
Storage Temperature
ESD Sensitivity (HBM)
+5.5 Vdc
-1.0 to +25V
-65 to +150 °C
Class 1A
65
60
4.75V
55
5.00V
5.25V
50
-1 1 3 5 7 9 11 13 15 17 19 21 23 25
TUNING VOLTAGE (V)
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Reliability Information
Junction Temperature To Maintain
1 Million Hour MTTF
Nominal Junction Temperature
(T = 85 °C)
Thermal Resistance
(Junction to GND paddle, 5V supply)
Operating Temperature
135 °C
119 °C
97 °C/W
-40 °C to +85 °C
Outline Drawing
8
Pin Descriptions
Pin Number
1 - 3, 5 - 11,
13, 17 - 24
Function
N/C
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER Ni.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
Description
No Connection. These pins may be connected to RF/DC
ground. Performance will not be affected.
Interface Schematic
4
Vtune
Control Voltage and Modulation Input. Modulation
bandwidth dependent on drive source impedance.
8-3
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]