HMC587LC4B_10 Datasheet, PDF (3/4 Pages) Hittite Microwave Corporation – WIDEBAND MMIC VCO w/ BUFFER AMPLIFIER, 5 - 10 GHz

v02.0810
Absolute Maximum Ratings
Vcc
Vtune
Junction Temperature
Continuous Pdiss (T = 85°C)
(derate 12.5 mW/°C above 85°C)
Thermal Resistance
(junction to ground paddle)
Storage Temperature
Operating Temperature
+5.5 Vdc
0 to +22V
135 °C
625 mW
80 °C/W
-65 to +150 °C
-40 to +85 °C
Outline Drawing
HMC587LC4B
WIDEBAND MMIC VCO w/ BUFFER
AMPLIFIER, 5 - 10 GHz
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
8
Pin Descriptions
Pin Number
Function
1 - 3, 5 - 11,
N/C
13, 17 - 24
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER Ni.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
Description
No Connection. These pins may be connected to RF/DC
ground. Performance will not be affected.
Interface Schematic
Control Voltage and Modulation Input. Modulation
4
Vtune
bandwidth dependent on drive source impedance. See
“Determining the FM Bandwidth of a Wideband Varactor
Tuned VCO” application note.
12
Vcc
Supply Voltage Vcc= +5V
8-3
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]