HMC466LP4_09 Datasheet, PDF (3/4 Pages) Hittite Microwave Corporation – MMIC VCO w/ BUFFER AMPLIFIER, 6.1 - 6.72 GHz

v03.1109
HMC466LP4 / 466LP4E
MMIC VCO w/ BUFFER
AMPLIFIER, 6.1 - 6.72 GHz
12
Absolute Maximum Ratings
Vcc
Vtune
Channel Temperature
Continuous Pdiss (T = 85°C)
(derate 6.28 mW/°C above 85°C)
Storage Temperature
Operating Temperature
+3.5 Vdc
0 to +11V
135 °C
5.65 W
-65 to +150 °C
-40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
Typical Supply Current vs. Vcc
Vcc (V)
Icc (mA)
2.75
22
3.0
31
3.25
41
Note: VCO will operate over full voltage range shown above.
12 - 64
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOT FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
HMC466LP4
Package Body Material
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC466LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H466
XXXX
H466
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com