HMC447LC3 Datasheet, PDF (3/6 Pages) Hittite Microwave Corporation – SMT GaAs HBT MMIC DIVIDE-BY-4, 10 - 26 GHz

v00.1005
HMC447LC3
SMT GaAs HBT MMIC
DIVIDE-BY-4, 10 - 26 GHz
5
Output Voltage Waveform,
Pin= 0 dBm, Fout= 2.5 GHz, T= 25 °C
Absolute Maximum Ratings
100
80
60
40
20
0
-20
-40
-60
-80
-100
22.7 22.8 22.9 23 23.1 23.2 23.3 23.4 23.5 23.6 23.7
TIME (nS)
RF Input (Vcc = +5V)
Supply Voltage (Vcc1, Vcc2)
Junction Temperature (Tj)
Continuous Pdiss (T = 85 °C)
(derate 11.9 mW/° C above 85 °C)
Thermal Resistance (R )
TH
(junction to ground paddle)
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
+13 dBm
+5.5V
135 °C
595 mW
84 °C/W
-65 to +150 °C
-40 to +85 °C
Class 1A
Typical Supply Current vs. Vcc
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Vcc1, Vcc2 (V)
Icc (mA)
4.75
84
5.0
96
5.25
108
Note: Divider will operate over full voltage range shown above
Outline Drawing
5 - 114
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES
GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS]
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C- .
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com