HMC446_06 Datasheet, PDF (3/6 Pages) Hittite Microwave Corporation – GaAs MMIC 10W T/R SWITCH, 824 - 894 MHz*

v03.0805
HMC446 / 446E
GaAs MMIC 10W T/R
SWITCH, 824 - 894 MHz*
8
Absolute Maximum Ratings
Max. Input Power
(Vdd = +8V, V = 0/+8V)
CTL
Supply Voltage (Vdd)
Control Voltage Range (Vctl)
Storage Temperature
Operating Temperature
Tx Port 41 dBm
Rx Port 33 dBm
+10 Vdc
-0.2 to Vdd
-65 to +150 °C
-40 to +85 °C
Do not operate continuously at power levels > 1 dB com-
pression and do not “hot switch” power levels greater than
+36 dBm (Vctl= +8V) into the Tx port and no greater than
+27 dBm into the Rx port.
Truth Table
Control Input
Signal Path State
Vctl (Vdc)
Tx to RFC
RFC to Rx
0.0
OFF
ON
Vdd
ON
OFF
Vdd = +5.0V to +8.0V ± 0.2V
Control Input Voltage Tolerances are ± 0.2 Vdc.
DC blocking capacitors are required at ports RFC, Tx and
Rx. Inductors are required from Tx to RFC and Rx to RFC.
See Application Circuit Herein.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND
8 - 258
Package Information
Part Number
Package Body Material
HMC446
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC446E
RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H446
XXXX
446E
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com