HMC438MS8G_07 Datasheet, PDF (3/6 Pages) Hittite Microwave Corporation – SMT GaAs HBT MMIC DIVIDE-BY-5, DC - 7.0 GHz

v03.0705
HMC438MS8G / 438MS8GE
SMT GaAs HBT MMIC
DIVIDE-BY-5, DC - 7.0 GHz
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz, T= 25 °C
6
300
200
100
0
-100
-200
-300
-400
Absolute Maximum Ratings
RF Input (Vcc= +5V)
+13 dBm
Vcc
+5.5V
Maximum Channel Temperature
135 °C
Continuous Pdiss (T=85 °C)
(derate 11.3mW/°C above 92 °C)
485mW
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
DC blocking capacitors are required at RF input and RF output ports.
Choose value for lowest frequency of operation.
-500
22.5
23
23.5
24
24.5
25
25.5
TIME (ns)
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
Typical Supply Current vs. Vcc
Vcc (V)
Icc (mA)
4.75
75
5.0
80
5.25
87
Note: Divider will operate over full voltage range shown above
6 - 92
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
HMC438MS8G
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC438MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H438
XXXX
H438
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com