HMC438MS8G Datasheet, PDF (3/6 Pages) Hittite Microwave Corporation – SMT GaAs HBT MMIC DIVIDE-BY-5, DC - 7.0 GHz

v01.1002
MICROWAVE CORPORATION
10
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz, T= 25 °C
400
300
200
100
0
-100
-200
-300
22.5
23
23.5
24
24.5
25
25.5
TIME (ns)
Outline Drawing
HMC438MS8G
SMT GaAs HBT MMIC
DIVIDE-BY-5, DC - 7.0 GHz
Absolute Maximum Ratings
RF Input (Vcc= +5V)
+13 dBm
Vcc
+5.5V
Maximum Channel Temperature
135 °C
Continuous Pdiss (T=85 °C)
(derate 11.3mW/°C above 92 °C)
485mW
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
DC blocking capacitors are required at RF input and RF output ports.
Choose value for lowest frequency of operation.
Typical Supply Current vs. Vcc
Vcc (V)
Icc (mA)
4.75
75
5.0
80
5.25
87
Note: Divider will operate over full voltage range shown above
10 - 98
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEADFRAME MATERIAL: COPPER ALLOY
3. LEADFRAME PLATING: Sn/Pb SOLDER
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com